94 Chimaera 400 clutch issues

[94Chim400]

Hi all,

I’ve recently ran into some clutch related issues on my chim. I took the car to a “specialist” whereby they undertook the following work:

- Master cylinder and slave cylinder replaced.
- Clevis pin replaced.
-Rebleed clutch.
-Replace clutch arm and pivot and pushrod.

And a few weeks later… I’ve now lost again 70% of clutch pedal depth and can see that the reservoir is now empty (have topped up, which provided some degree of pedal feel back). I have also noticed some leaking in the footwell… which I assume is the fluid.

Any help / ideas would be greatly appreciated - my initial thoughts are it may need another rebleed… but I am not expert at all.

Thanks

[baconsarney]

If not pipework/unions maybe poorly fitted seals in the new cylinders?

[Belle427]

Give it back to them, there should be no fluid escaping from the system.

[pwd95]

If they had the master from Motaclan there's a good chance it will have failed very quickly like mine did recently.