Diagnostics
Diagnostics
Author
Discussion

jessica

Original Poster:

6,321 posts

281 months

Sunday 23rd October 2005
quotequote all
ok you mottley lot...

happily making my way to brum on the M6. PSI shows me that my oil pressure is suddenely 90...(eek)
Major Panic...
normally runs at 30.
No oil light on no smoke running fine.
pull into services cannot see anything.
so off I go.
Arrive at destination and car is fine.

meter rises with just the ignition turned on and no engine running..

so is it the wiring to the meter?
The oil pressure Sender.
or what...???

anyone had this problem.

Blackpool Rocker

381 posts

251 months

Sunday 23rd October 2005
quotequote all
Hi Jessica,

I am a little new to all this TVR fun, But sounds to me like a pressure sensor failure or at the outside,possable gauge fault.

Although, as you were on the "M6 around Birmingham" which is my local haunt, perhaps its the Birmingham Triange...In that case is simply 'Witch craft"

halfman

65 posts

269 months

Sunday 23rd October 2005
quotequote all
When my oil pressure sender went, it was reading 90 without the engine running. I think they must be designed to read high when faulty so you dont have a heart attack (i.e. suddenly dropping to zero)

thornogson

833 posts

291 months

Sunday 23rd October 2005
quotequote all
I had similiar fault, plumped for the sender and changed that, turned out to be the gauge. Only certain way is to couple a seperate oil line and gauge to the engine and check the pressure. You will then know wether to change the gauge or sender.

harrow_chim

514 posts

312 months

Monday 24th October 2005
quotequote all
The wire has probably dropped off the sender and is flapping in the breeze. Have a quick buthchers underneath.
Nick

crackedfinger

1,569 posts

258 months

Monday 24th October 2005
quotequote all
harrow_chim said:
The wire has probably dropped off the sender and is flapping in the breeze. Have a quick buthchers underneath.
Nick


Actualy it will be th eopposite - without the wire the guage will nto move - over reading coul be oil ont he wiring earthing the spade connector.

jessica

Original Poster:

6,321 posts

281 months

Monday 24th October 2005
quotequote all
guess me on the floor tomorrow then..............
will have a fiddle and a look....
cant be much wrong .running like a dream.

harrow_chim

514 posts

312 months

Tuesday 25th October 2005
quotequote all
jessica said:
guess me on the floor tomorrow then..............
will have a fiddle and a look....
cant be much wrong .running like a dream.


Don't forget to take your shades off first.

jessica

Original Poster:

6,321 posts

281 months

Tuesday 25th October 2005
quotequote all
harrow_chim said:

jessica said:
guess me on the floor tomorrow then..............
will have a fiddle and a look....
cant be much wrong .running like a dream.



Don't forget to take your shades off first.


jessica

Original Poster:

6,321 posts

281 months

Saturday 29th October 2005
quotequote all
no loose or dirty wires to report.
so I guess its live with it or get a new oil sender fitted and suck it and see.

harrow_chim

514 posts

312 months

Sunday 30th October 2005
quotequote all
jessica said:
suck it and see.



You'll get a mouthful of oil doing that