Discussion
TMS in Meltom Mowbray did me a new key and alarm fob for around £50.
My new key also has the alarm integrated as opposed to a seperate alsrm fob keyring! Much easier.
They needed the red card number or alarm details as given in your handbook and I had to personally go up to get it tuned in (or whatever they do).
Hopefully you shouldn't have a problem finding a place which can do this for you in OZ.
Good luck!
My new key also has the alarm integrated as opposed to a seperate alsrm fob keyring! Much easier.
They needed the red card number or alarm details as given in your handbook and I had to personally go up to get it tuned in (or whatever they do).
Hopefully you shouldn't have a problem finding a place which can do this for you in OZ.
Good luck!
Once you have got your new Meta fob, here's the procedure to synchronise it with your old fob as provided by my local TVR dealer when I bought my new fob -
1) You must have a working fob.
2) With the working fob, activate/deactivate the alarm 8 times (i.e. 8 x on, and 8 x off) with less than 8 seconds between actions. The alarm will not take any more actions beyond this anyway. All other fob details will be deleted at this point (apart from the one used for the 16 actions).
3) Within 8 seconds, activate the new fob, the system will respond with a single change of state (it may require a couple of attempts), the details of the new fob are then added to the data held by the system unit.
4) Any other fobs you wish to use must also be activated at this time (apart from the one used in point 2).
5) Leave the system quiet for at least 8 seconds.
6) Your new fob(s) and the original one will now be synchronised with the system.
I was warned that meta systems can only take 3 fobs i.e. two original fobs plus one replacement fob, but I suspect this means a total of three fobs in the list of usable fobs.
1) You must have a working fob.
2) With the working fob, activate/deactivate the alarm 8 times (i.e. 8 x on, and 8 x off) with less than 8 seconds between actions. The alarm will not take any more actions beyond this anyway. All other fob details will be deleted at this point (apart from the one used for the 16 actions).
3) Within 8 seconds, activate the new fob, the system will respond with a single change of state (it may require a couple of attempts), the details of the new fob are then added to the data held by the system unit.
4) Any other fobs you wish to use must also be activated at this time (apart from the one used in point 2).
5) Leave the system quiet for at least 8 seconds.
6) Your new fob(s) and the original one will now be synchronised with the system.
I was warned that meta systems can only take 3 fobs i.e. two original fobs plus one replacement fob, but I suspect this means a total of three fobs in the list of usable fobs.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff