Rear light bulbs
Discussion
I don't actually need to do it at the moment, but how do you change the rear light bulbs. 2000 Chim with the later type lights?
Steve Heath book says you do it from inside the boot but that doesn't look possible to me.
Just a bit of info that will no doubt come in useful one day,
Keith
Steve Heath book says you do it from inside the boot but that doesn't look possible to me.
Just a bit of info that will no doubt come in useful one day,
Keith
1. Take the velrco flap off
2. Find the correct bulb housing for the light you need to change
3. Unscrew the correct housing (may be difficult as these tend to be gummed up with carpet adhesive - you may need to pull some carpet away too)
4. Change bulb in usual manner (i.e. push down and quarter turn anti-c/wise; push new one in and quarter trun clockwise)
5. Screw housing back in
6. Re-glue carpet if needed
7. Replace velcro flap.
HTH
2. Find the correct bulb housing for the light you need to change
3. Unscrew the correct housing (may be difficult as these tend to be gummed up with carpet adhesive - you may need to pull some carpet away too)
4. Change bulb in usual manner (i.e. push down and quarter turn anti-c/wise; push new one in and quarter trun clockwise)
5. Screw housing back in
6. Re-glue carpet if needed
7. Replace velcro flap.
HTH
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


