Best?cheap place for oil pressure sender
Discussion
Its a 4.0 chimp/95 /serp/ single terminal / gold.
Where the male spade terminal comes out of the unit is very loose and the thing is reading a bit odd.The female connector is fine it seems to be inside the unit that is knackered and loose.I think the cableties on the wire/chassis have been to tight and not had enought slack in it for engine movment.
I have not had the car long, when cold and warm its about 25psi on tickover and goes to about 30 at revs.But had did she it shoot up to 60 twice when i putt my foot down !!.
Where the male spade terminal comes out of the unit is very loose and the thing is reading a bit odd.The female connector is fine it seems to be inside the unit that is knackered and loose.I think the cableties on the wire/chassis have been to tight and not had enought slack in it for engine movment.
I have not had the car long, when cold and warm its about 25psi on tickover and goes to about 30 at revs.But had did she it shoot up to 60 twice when i putt my foot down !!.
Try Leven.
Did you really need to double-post?
www.pistonheads.com/gassing/topic.asp?t=245288&f=13&h=0
Did you really need to double-post?
www.pistonheads.com/gassing/topic.asp?t=245288&f=13&h=0
Top Chimp said:
Thanks tvrparts have just mailed me a new one out today.When i went out today it read 25 psi with out the engine on , just the ignition !!, not right one thinks.
methinks something is not quite right there..
That or you have the most phenomenal oil pressure in the world. 25 psi without even using the pump! Impressive
Gassing Station | Chimaera | Top of Page | What's New | My Stuff