Chim starter motor
Discussion
Yes, it's a common problem. Conventional wisdom was that the starter motor needed replacing. But there's also a (fairly convincing) school of thought that attributes the problem primarily to inadequate wiring. When the wiring is hot, its resistance is higher so there is more of a voltage drop across it, and less power for the solenoid. Combine that with the solenoid potentially being sticker when hot, and you can get the symptoms you're seeing. Modwise sell a kit that uses the existing solenoid wiring to power a relay which takes a direct feed from the battery with heavier wiring so that the solenoid gets more juice, and many say this has cured their problem.
The website is a bit of a dog's egg, but try this www.clarionservice.co.uk/id32.html
and here's a recent thread discussing it with the magic words highlighted:
www.pistonheads.co.uk/gassing/topic.asp?t=190191&f=8&h=0&hw=modwise+hot+start
and here's a recent thread discussing it with the magic words highlighted:
www.pistonheads.co.uk/gassing/topic.asp?t=190191&f=8&h=0&hw=modwise+hot+start
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


