Analogue Clock reset - not working

[Andy JB]

I'm not sure if this is a common problem but the analogue clock in my Chim works but does not allow the clock to be reset with teh pin reset button. Is there a quick fix or alternative.

I suppose failing any suggestions teh only alternative is to disconnect battery & wait until teh time catches up with teh clock!

[Andy11]

Must be a common problem? I was having the same trouble, but have fixed it by extending the black button. Just seems to be too short.

[Chris Smith]

It may sound daft but try pushing the black button in harder. I thought mine was knackered until someone pointed this out to me. I have to push mine preety hard. Apparently every one requires a different level of presure. Also, it only works one way, so try turning both ways (with your presure on) before giving up! Hope it helps.

[stuartc]

I have the same issue will try more pressure

[stuartc]

Works I now have the correct time thanks

[Chris Smith]

No worries!

[Andy JB]

Thanks for the advice - saved me a packet. I tried the push & turn last nite per my original posting & it worked. The time i'd spent trying to get the clock to work and failing was frustrating and about to replace it. To think i've built a car before and i can't opreate teh Chims clock is embarrassing to say the least!!!