I have shorted out my car - PLEASE HELP
I have shorted out my car - PLEASE HELP
Author
Discussion

gateeast

Original Poster:

100 posts

254 months

Monday 15th May 2006
quotequote all
Whilst attempting to tighten the altenator belt the spanner slipped and caused a short between that and the exhaust. The car is as dead as a dead thing, please help.

Big Al.

69,336 posts

288 months

Monday 15th May 2006
quotequote all
Not sure, but check yor fuses especially the 100 amp!

V8 Archie

4,703 posts

278 months

Monday 15th May 2006
quotequote all
And the 80 amp in the footwell.

gateeast

Original Poster:

100 posts

254 months

Monday 15th May 2006
quotequote all
I assume I am looking for some big fuses not the normal ones for internal clocks etc?

victormeldrew

8,293 posts

307 months

Tuesday 16th May 2006
quotequote all
The 100 amp fuse is down by the starter motor, strapped to the chassis, in a little plastic case.

V8 Archie

4,703 posts

278 months

Tuesday 16th May 2006
quotequote all


The 100amp is pictured in the bible.
The 80amp is in the footwell in an inch-cube plastic box.

gateeast

Original Poster:

100 posts

254 months

Tuesday 16th May 2006
quotequote all
Thank you all, are these TVR only parts or are they available somewhere else?

V8 Archie

4,703 posts

278 months

Tuesday 16th May 2006
quotequote all
I pretty sure they aren't TVR parts, but you'll have to do a bit of hunting as fuses that size don't grow on trees. If it's blown take it to your local motor factor I reckon.

tahiti450

712 posts

267 months

Tuesday 16th May 2006
quotequote all
gateeast said:
Thank you all, are these TVR only parts or are they available somewhere else?


The 100A fuses (strip fuses) should be widely available from any decent auto electrical factor, I had no trouble getting some and cheap as chips. The holder often melts also and tese are similarly cheap and should be off the shelf. I think these fuses are mainly used on commercials so trade factors are your best bet. SHORTS in Swansea certainly have them. The 80 A fuse I havnet had to touch but i would assume the same would apply.