Front indicator bulb
Front indicator bulb
Author
Discussion

mark c

Original Poster:

63 posts

314 months

Thursday 25th May 2006
quotequote all
Is there anything special about the front indicator bulbs? Mine's just blown and I want to get hold of a replacement before I start pulling things apart...

Mucho thanks,

Mark C

Mad Mitch

842 posts

258 months

Thursday 25th May 2006
quotequote all
Normal single filament 5w 12v bulb.....

mark c

Original Poster:

63 posts

314 months

Thursday 25th May 2006
quotequote all
Thanks!!!!

Regards,

Mark

tvr keith

1,908 posts

252 months

Thursday 25th May 2006
quotequote all
Mitch, you sure about that, I thought indicators were 21W?

Cider Andy

1,889 posts

255 months

Thursday 25th May 2006
quotequote all
tvr keith said:
Mitch, you sure about that, I thought indicators were 21W?


Yes, they are 21W, not 5W.

Mad Mitch

842 posts

258 months

Friday 26th May 2006
quotequote all
You know when you are just having one of them days!!!!!
Sorry guys, think i need a holiday.

v41ley

3,022 posts

268 months

Friday 26th May 2006
quotequote all
mark c said:
Is there anything special about the front indicator bulbs? Mine's just blown and I want to get hold of a replacement before I start pulling things apart...

Mucho thanks,

Mark C


It helps if you are double-jointed to get your hand through 'Ned's Hole' to unscrew the bulb holder.

mark c

Original Poster:

63 posts

314 months

Friday 26th May 2006
quotequote all
Yep, they are 21W - not to worry, I'd bought a 'selection' just in case!

Ned's hole works great getting it off once you figure out which bit unscrews, screwing the whole thing back on again is a bit of a pain though!!

Cheers,

Mark

Andy JB

1,321 posts

249 months

Friday 26th May 2006
quotequote all
Be careful you buy the correct bayonet fitting, at a glance they look similar but teh correct one is slightly unparallel if that makes sense. Take teh old one with you & match exactly with connector fitting.