Discussion
I guess the other half of this question is what to do with the Diff.. The newer BTR Diff has a final drive of 3.45 to 1, and the later BW T5 Box has a ratio of 0.8 to 1 in top so this would give 2760 rpm per 1000. The Old GKN Diff has a final drive of 3.31 to 1, and the early LT77 Box has a ratio of 0.83 to 1 in top so this would give 2747 rpm per 1000.
Cheers,
Matt.
Cheers,
Matt.
These may help a little assuming you are talking Chimaera T5 box
Std 1996 4.0 T5 box below
http://img.photobucket.com/albums/070
Cossie T5 box with Chimaera T5 in foreground
http://img.photobucket.com/albums/070
As you can see the gear lever on a Cossie box is a good 4" ish back
What you can't see is the prop shaft on a Cossie n TVR box is diffo. The Chimaera box output spline is larger so you will need a matching prop. The input shaft clutch spline is deeper aswell and the nose (clutch bearing carrier part) is also a diffo diameter, plus as mentioned above the g/box mount holes are spaced diffo.
Saying all that, a Cossie T5 box will bolt straight upto a 4.0 V8 engine (given all the bits lol)
hths
Std 1996 4.0 T5 box below
http://img.photobucket.com/albums/070
Cossie T5 box with Chimaera T5 in foreground
http://img.photobucket.com/albums/070
As you can see the gear lever on a Cossie box is a good 4" ish back
What you can't see is the prop shaft on a Cossie n TVR box is diffo. The Chimaera box output spline is larger so you will need a matching prop. The input shaft clutch spline is deeper aswell and the nose (clutch bearing carrier part) is also a diffo diameter, plus as mentioned above the g/box mount holes are spaced diffo.
Saying all that, a Cossie T5 box will bolt straight upto a 4.0 V8 engine (given all the bits lol)
hths
Edited by 900ss on Wednesday 7th June 22:18
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





Cossie!!