Discussion
Hi All, Not sure what the best thing is for me to do about this one. I have a paint bubble about 10mm dia. right in the middle of my bonnet. Do I just leave it or try and burst it and touch it up. Im not sure what has caused it, anyone else had one or knows what the best course of action is. Cheers
sam gamgee said:
Chipsaway should be able to sort it and do a faultless job to boot.....never used em but seen really good results. Good luck!
Dave
Dave
Personally I would ask a bodyshop thats got a good rep at dealing with fibre glass cars to take a look and give me a quote.
If I had a TVR I wouldn't feel comfortable with Dave's suggestion of chipsaway
Always worth looking at other avenues....! But no damage (correct me if I`m wrong here) to grp so back to small paint job? Always found that these places want to do full panels...whatever, good luck....
Hello Kirsty! Do you miss the place? Never been keep meaning to...the factory, btw, not Blackers!!! (Gawd, really must go to bed...)
Dave.
Hello Kirsty! Do you miss the place? Never been keep meaning to...the factory, btw, not Blackers!!! (Gawd, really must go to bed...)
Dave.
Edited by sam gamgee on Sunday 2nd July 00:30
Had the same problem over the last couple of weeks, two bubbles about 1cm dia on the nearside rear wing, and lots of mini ones on the boot. I've had to leave the car out in the sun for the last few weeks, which may well be the cause. No underlying damage. Was wondering if bursting is just going to create more problems (don't burst your spots son, they'll spread)
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



, but chipsaway can't do starmist colours they tell me.