blowers not working, winter coming !!!
Discussion
Hi Adam,
My heater packed up about a month ago. Turned out to be the control box behind the
dash. The main feed to the control box had melted the socket shell and the pin.
Took the box out, pulled it apart and cut the connector off. I then soldered directly to
the old plug pins that remained with wire of a similar thickness. On the other end I fitted
some large bullet crimps.
Then fitted bullet crimps to the cables in the car. Reconnected everything and Bobs your
auntie.
The problem has been reported on here a few times just recently with photos.
I did have the option of fitting a new connector but it just isn't up to the job hence the
failure in the first place.
Do make sure that you label wires first though.
A new box by the way is £160 plus vat.
It is a dash off job but once you've done it once it will only take 10 mins.
Hope this is of some help.
Cheers
Paul
My heater packed up about a month ago. Turned out to be the control box behind the
dash. The main feed to the control box had melted the socket shell and the pin.
Took the box out, pulled it apart and cut the connector off. I then soldered directly to
the old plug pins that remained with wire of a similar thickness. On the other end I fitted
some large bullet crimps.
Then fitted bullet crimps to the cables in the car. Reconnected everything and Bobs your
auntie.
The problem has been reported on here a few times just recently with photos.
I did have the option of fitting a new connector but it just isn't up to the job hence the
failure in the first place.
Do make sure that you label wires first though.
A new box by the way is £160 plus vat.
It is a dash off job but once you've done it once it will only take 10 mins.
Hope this is of some help.
Cheers
Paul
crazycraig said:
Thank god I'm not the only one!
Dav
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




I've looked back through the service history & it's been like that since it left the factory! 