Another brake light problem
Discussion
Currently have a problem with the brake lights.
Switch is ok, 12V supply at the switch is ok so not fuse etc, just a break somewhere between the front and back of the car!!
I have taken a wire directly from the switch to the back lamp and hey presto!! (needed for the MoT this morning
) Proves also unlikely not to be an earth problem.
Anyone any ideas of a likely place that the break might be ??
Or even the route that the loom runs through the car??
Don't really want to leave the bit of wire out the window and into the boot
Cheers
Mark
Switch is ok, 12V supply at the switch is ok so not fuse etc, just a break somewhere between the front and back of the car!!
I have taken a wire directly from the switch to the back lamp and hey presto!! (needed for the MoT this morning
) Proves also unlikely not to be an earth problem. Anyone any ideas of a likely place that the break might be ??
Or even the route that the loom runs through the car??
Don't really want to leave the bit of wire out the window and into the boot
Cheers
Mark
cln1 said:
Multiblock connector behind carpet nearside of car behind door.
Colin.
Colin.
Thanks Colin. Just found the connector and given it a bit of 'TVR-wiggle' and it it seems to have done the trick. Have to keep my eye on it. Don't you just love intermittant problems!!
Cheers for the suggestion.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


