Which discs?

[ariddell]

Guys,
I need to order some replacement front discs for my 98 Chim 400 but there seem to be a bewildering number of options out there. It's currently running the completely standard setup so any benefit that can be had from upgraded parts would be great but I don't want to be replacing calipers/hubs etc etc, so just sticking with the standard sizes.

Any recommendation for what I should go for?

Cheers

Al

[Al Up North]

Al,...
When it was time for my brakes to be done, I used (same size as standard) EBC drilled and grooved, with green stuff pads all round.
Amazing difference!!
I also flushed out the fluid and peplaced with dot 5.1.
Not sure if that added to the improvement,... but the overall result was superb!!
Hope this helps!
Al

[Big Ashy]

Peninsula TVR do some cracking Brembo cross drilled and grooved standard diameter discs. I have them on my Griff with Mintex 1144 pads and am well impressed, do plenty of track days and sprints and work from cold

[-JUT-]

I have drilled and grooved discs from the this ebay seller

http://cgi.ebay.co.uk/FOCUS-SIERRA-SC

They do front and rear discs and they are of good quality, offer improved braking and cost naff all (comparitively)

Can't go wrong really!

[TVRmuppet]

I've got some from him . They appear to be very good. Got red stuff pads, we will see how we go ....or stop as the case may be.

[GreenV8S]

-JUT- said:

Can't go wrong really!

If they're drilled then yes they can go really wrong, grooved is usually fine but I would recommend you avoid drilled discs.