Handbrake on dash indicator light not working
Discussion
Mine is stuck on.
Spoke to Brian at Fernies and it is a common problem, although a bit of a sod to do. It's on top of the gearbox and can't be got at from above and (IIRC) you have to at minimum drop the exhaust off. Basically, a fair bit of labour for a £2 switch. The advice I got was to leave it until something else was being done in the area and get it done then.
Spoke to Brian at Fernies and it is a common problem, although a bit of a sod to do. It's on top of the gearbox and can't be got at from above and (IIRC) you have to at minimum drop the exhaust off. Basically, a fair bit of labour for a £2 switch. The advice I got was to leave it until something else was being done in the area and get it done then.
It can only be got to from the top! remove the centre console (you don't have to remove the door handle) 2 screws at the front and 2 under the pocket trim at the back. Underneath is another fibreglass panel, remove all the screws from this and you are in to the top of the gearbox and the handbrake switch. You then have to bend the metal bracket onto the switch or off whatever the case is. Not a long job, about an hour at the most. By the way, whilst you are at it, you can tighten the handbrake pivot bolt up, another common problem.
Edited by andy11 on Tuesday 6th February 14:54
.Mark said:
Nuggs said:
.Mark said:
Bit spooky!!!
Both Nuggs and I had exactly the same post count before I posted this one.
Both Nuggs and I had exactly the same post count before I posted this one.
And we've never been seen together in the same place
...oh yes we have
As you were...
Oh GOD! - it happened again.
Edited by .Mark on Wednesday 7th February 09:14
And again
Am I going to have to follow you around all day?

Gassing Station | Chimaera | Top of Page | What's New | My Stuff



