Rear Calipers; refurb or replace?
Rear Calipers; refurb or replace?
Author
Discussion

mgaut

Original Poster:

774 posts

272 months

Monday 19th February 2007
quotequote all
A bit of advice please; either recommendations for someone to refurb a pair of sticking rear brake calipers (and cost), or the relative cost and advantage of replacing ?

Currently without car, as it's having an engine/gearbox/diff oil change*, so not sure of sizes/part no's, but it's a '94 Chim with the 2p sized disks.

cheers

*mechanic puts EP oil in the gearbox as my ATF stuff is wrong; AAAAARRRRGGGGGGGG

That Daddy

19,457 posts

251 months

Monday 19th February 2007
quotequote all
ford sierra/granada 2.0i up to 2.9i in fact any sierra/granny with ABS as long as its not a vented rear brake calliper system,i would go for re/manafactured units from a reputable motor factor,than getting involved with cleaning and resealing yours,and they come with that nice plated finish,there not expensive either.

mgaut

Original Poster:

774 posts

272 months

Monday 19th February 2007
quotequote all
thanks; is there a part number on them or do I need to dig my bible out ?

That Daddy

19,457 posts

251 months

Monday 19th February 2007
quotequote all
no just ask for the callipers i have listed,trust me there the ones but take your old ones with you there exchange anyways,good luck.

mgaut

Original Poster:

774 posts

272 months

Monday 19th February 2007
quotequote all
too easy; great !! many thanks

That Daddy

19,457 posts

251 months

Monday 19th February 2007
quotequote all
blimey,that was the quickest response ever.

spend

12,581 posts

281 months

Tuesday 20th February 2007
quotequote all
IIRC £100 will buy you a set of later uprights + hubs + calipers + disks from the TVR scrappers if you want to upgrade to later spec. I was quite surprised how cheap this was for what you got (from a late low mileage car at Douglas Valley). This is prob only useful if you will upgrade the fronts at some stage.

Dave

mgaut

Original Poster:

774 posts

272 months

Tuesday 20th February 2007
quotequote all
fronts are already off a Griff 500, so that's another option. cheers

that daddy

19,457 posts

251 months

Tuesday 20th February 2007
quotequote all
spend said:
IIRC £100 will buy you a set of later uprights + hubs + calipers + disks from the TVR scrappers if you want to upgrade to later spec. I was quite surprised how cheap this was for what you got (from a late low mileage car at Douglas Valley). This is prob only useful if you will upgrade the fronts at some stage.

Dave

Spend, i have been quoted 125+vat plus postage per side,i checked myself recently,Douglas valley.

spend

12,581 posts

281 months

Tuesday 20th February 2007
quotequote all
that daddy said:
Spend, i have been quoted 125+vat plus postage per side,i checked myself recently,Douglas valley.


Paying cash, and timing for Steves holidays is critical The boys do like a box of biscuits as well

Dave

that daddy

19,457 posts

251 months

Tuesday 20th February 2007
quotequote all
spend said:
that daddy said:
Spend, i have been quoted 125+vat plus postage per side,i checked myself recently,Douglas valley.


Paying cash, and timing for Steves holidays is critical The boys do like a box of biscuits as well

Dave

Ahh ah,nice one,i will remember that Spend.