Front Brake Discs - Hub Diameter 95/96 ?????

[andy jb]

Ordering some front brake discs on a 95/95 Chimaera 500, there appears to be 2 hub diameters either 53mm hub or later ones with a bigger offset.

Without being able to check - can anyone confirm if there is a standard diameter for this year on 260mm discs?

[lwt]

Your figures & description are not too clear. I have just been out into my (cold) garage and measured the discs that I have just taken off my 98 Chim. The central hole, where the disc slides over the hub, is about 62mm dia. The hub itself (the bit with the 4 studs in it) is about 130mm diamteter. I hope this helps as I don't want to go outside again!

Ian.

[GreenV8S]

The standard 4-bolt Ford center bore diameter is 2.5", the bolt spacing is 3" square. The bit that varies is the outer diameter of the hub, I've seen a couple of variations but from memory the bigger one is 5 1/4". To be on the safe side you would need to check the dimensions on your own car.