Indicator Relay
Indicator Relay
Author
Discussion

justace4

Original Poster:

9 posts

237 months

Thursday 22nd March 2007
quotequote all
Hi, hoping someone will help me.
I suspect the flasher relay has died.There is no indicators or hazzard lights.Prior to it's death the relay was buzzing, causing the indicator to stay on and not to flash. This would happen intermittantly. I've checked all the fuses and none are blown.
In past threads it has been described as a tall black GM unit. No such thing in my dash(1994 Chim). It is a tall yellow 5 pin Ford part. I don't know if this helps but the number on top of it is 85GG 13C718 AA. Also printed in bright red on the side is 4ED512.
As live in Perth Australia I'm unable to get this relay here. Where would be the best place in the U.K to get this sent over?

Thanks Justin.

spend

12,581 posts

281 months

Thursday 22nd March 2007
quotequote all
You are looking under the dash top rather than the fusebox, are you? Sorry to state the obvious..

Dave

justace4

Original Poster:

9 posts

237 months

Thursday 22nd March 2007
quotequote all
Yes looking under the dash, I'd post pictures if I knew how to get them on here. There is three relays. Two small red ones and one large yellow. They are next to the black box central locking unit.

spend

12,581 posts

281 months

Thursday 22nd March 2007
quotequote all
I'll have a look in the morning, I've got a spare aux relay hidden away.

YHM

Dave

justace4

Original Poster:

9 posts

237 months

Saturday 24th March 2007
quotequote all
If the numbers next to the pins help. They are 15, 30, 31, 31L and 31S.

spend

12,581 posts

281 months

Sunday 25th March 2007
quotequote all
OK your pictures are at




Im fairly sure that relay/timer (a ford courtesy light unit) is for the cunningly automatic heated mirrors

The flasher unit goes in the top right as shown in your picture
My wiring diagram for the aux relay panel is at http://tvr3.dspen.com/Wiring_Diags/au which might help.

The flasher unit is a simple 3 pin flasher, I have a feeling it is like an RFL3
at www.vehicle-wiring-products.co.uk/VWPweb2000/relays/relays.html.

Dave

justace4

Original Poster:

9 posts

237 months

Saturday 31st March 2007
quotequote all
Dave,
Your knowledge and diagrams have been invaluable. It has allowed me to fix the problem with a standard 3 pin flasher relay(sited in the corner of the relay board with the yellow base). No need for heated mirrors over here, so I've dispensed with the 5 pin flasher/heated mirror combo.

Regards, Justin

tvr keith

1,912 posts

252 months

Saturday 31st March 2007
quotequote all
I didn't understand that, are you saying that the flasher relay is the same one that does the heated mirrors?

justace4

Original Poster:

9 posts

237 months

Sunday 1st April 2007
quotequote all
Keith, that is correct.
If you can access Spends' wiring diagram it shows that the chimaera can have a 5 pin combo mirror heater/flasher unit or just a straight 3 pin flasher unit.

spend

12,581 posts

281 months

Sunday 1st April 2007
quotequote all
No... You always need the flasher - the mirror timer is independant, they happen to share the same main power & earth (as do several other items). I was a little confused that yours was missing ~ dont know what these convicts do for their regulations when they allow proper cars into the jail hehe

Dave