Handbrake Cable
Discussion
Does anyone know what car the handbrake cable is from...i cant see it being TVR specific ....seen loads of ford ones on ebay and local motor factors can get a sierra one for £13 that looks the same as the one i took off....much better than the £50 for a 'TVR One' 
Edited by andy-w on Monday 23 April 12:45
that daddy said:
Andy why dont you take it with you
We had a look through a parts book on saturday as i was just passing so i found the one that looked most similar. I shall be taking the cable down there soon to have a look and see if we can match it up....was just seeing if anyone had a rough idea to give us a start.
Also going to need the part numbers for the top and bottom ball joints as well...i know the tops are saab...
Andy try to use the Ford cable rather than pattern if thats what it is,there crude enough standard, but the pattern ones pull the nipples of the ends
oh Andy my car is nearly back on the road by the way hope to take it home wensday,not being funny by the way just letting you know my progress,pics to follow
oh Andy my car is nearly back on the road by the way hope to take it home wensday,not being funny by the way just letting you know my progress,pics to followi was actually thinking of going with hydraulic handbrake...seen the calipers, about£60 each, would just need to make some brackets and another slave cylinder to actuate the calipers...but this is on hold....there are too many peopple rubbing my nose in it about getting there cars back on the road soon...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff