Ride Height

[chrispitman]

Could someone please tell me what the reccomended/standard ride height is. Reading on here the rear should be set 10mm higher than the front. What I'm after is the distance from the main chassis rail to the ground front an rear.

I have fitted protechs anyone reccomend some settings for these.

[spend]

For my car, I used 5 1/2" front & 6 1/2" rear as a starting point. Remember to load the drivers seat.

Dave

[Barreti]

spend said:

For my car, I used 5 1/2" front & 6 1/2" rear as a starting point. Remember to load the drivers seat.

Dave

So whats 5 1/2" and 6 1/2" when its converted from latin then Dave you old git

[spend]

Barreti said:

spend said:

For my car, I used 5 1/2" front & 6 1/2" rear as a starting point. Remember to load the drivers seat.

Dave

So whats 5 1/2" and 6 1/2" when its converted from latin then Dave you old git

All my chassis & engine is imperial - so I use imperial measurements.. Ah forgot.... As well as failing to teach you ignorant comprehensile nippers English, the appreciation of anything except base10 was not deemed important.

Respect your elders you impudent greying & balding pup (have you still got your own teeth, eyes & gonads BTW).

Dave
I suppose you know how many litre/km your car averages Mr Bragetti (grumpy cos the Nova brigade have burned you off again?)

Edited by spend on Tuesday 9th October 21:55

[S7Paul]

So that I can check mine, could you please clarify where those measurements are taken. I assume it's from the bottom surface of the main chassis rail to the ground, but where along the length of the chassis rail? In line with the wheel centres?