lower ball joint part number req

[hiltonig]

Anyone got a part number for this, have one for the upper ball joint but not the lower ???

[Seasider]

hiltonig said:

Anyone got a part number for this, have one for the upper ball joint but not the lower ???

Clever Trevor Part number C0036

[hiltonig]

Was is it a TVR own part ??

[GreenV8S]

hiltonig said:

Was is it a TVR own part ??

No.

[OscarT]

It's a Lada part.

[shpub]

Be careful... some lada parts do not have sufficient movement for the TVR application and their use will result in a catastrophic failure as the joint breaks. It is worth getting a specific TVR one so that the wheel and hub stays firmly attached...

[spend]

Same/similar to Lada, in many cases the flange holes are about 1mm off centre so would need reaming out.

Whether TVR were based on those parts, who knows??? Some Lada versions have been reported to fit fine in the past - but that seemed to be the minority? Don't know if there was some small change or diversity in the Lada parts??

The common advice has been to bite the bullet & fit genuine TVR parts.

Dave

[Seasider]

I believe the C/T ones are from Race Proved.. Possibly upgraded ??

Bit like the stronger drive shafts i'm waiting for