Rear Brake Piston Wind-In Tool

[raceboy]

Has anyone got a picture or details of what this looks like, used one a few years ago but it was borrowed and might not be able to get hold of it again, I can find a few on eBay but not sure if they are the right ones and don't really want to waste money on a useless tool and not find out it's useless until the rear brakes are in bits on my drive way.

[Paul (93 Chim)]

I use a 'g' clamp and a flat screw driver but it would be easier with the proper tool, try this link, it shows what it should look like, I bet you could get it cheaper elsewhere though.

http://www.drapertools-online.com/b2c/b2citmdsp.pg...

[spend]

They are pretty much a muchness, just make sure you get one with lugs to fit the piston (Ford Sierra)

Dave

[V8 Animal]

Got mine from halfords universal tool about £20
It has got the lugs and i did my brakes with it.
V8 Animal

[jeremyc]

Thin nose pliers can also act as s good substitute: stick one of each of the 'noses' in the holes, and press inwards whilst turning the piston.