Caliper allen key.

[tvr5000]

Anyone know what size the key is that fits the part that hold the pads in place. I know the main one that holds the caliper onto the hub are 8mm.
Cheers
Mick

[occasionaluse]

7mm if i remember correctly

[GreenV8S]

tvr5000 said:

Anyone know what size the key is that fits the part that hold the pads in place. I know the main one that holds the caliper onto the hub are 8mm.
Cheers
Mick

Don't know which ones you're talking about. Once you have the calliper off the upright, the pads drop out.

[tvr5000]

occasionaluse said:

7mm if i remember correctly

Cheers. I need to seperate the caliper to clean up. Or I was considering the upgrade from TVR Car Parts. They look pretty good value.

[PROPOP]

Yes 7mm is correct i use one of these cheap and cheerful, hope this helps

http://www.shop.edirectory.co.uk/autosave/225/mia/...

[kevin63]

Now if you was over here Mick I could have give you a couple.
And yes it is a 7mm, they are not sold in standard kits, all fords use them so you should have no problem getting one.

[tvr5000]

kevin63 said:

Now if you was over here Mick I could have give you a couple.
And yes it is a 7mm, they are not sold in kits, all fords use them so you should have no problem getting one.

I'm back up now. Will get myself along to a meeting as soon as the chimaeras back on the road. Should be mid Feb.

[kevin63]