Engine Connectors
Engine Connectors
Author
Discussion

chrispitman

Original Poster:

742 posts

284 months

Thursday 24th January 2008
quotequote all
Can anyone here help. What are the Lucas injector, temp, connectors are these

Junior Timer
or
Junior Power Timer Connectors

also the Trottle Pot Sensor anyone know where you can buy the loom connector for this, its the serp engine.

GreenV8S

31,027 posts

314 months

Thursday 24th January 2008
quotequote all
Junior Power Timer (i.e. the bigger ones).

The smaller connectors have the same terminals and can be plugged in but the housing is physically smaller and doesn't have the retaining clip.

chrispitman

Original Poster:

742 posts

284 months

Thursday 24th January 2008
quotequote all
Thanks.

Any ideas on where to get a replacement loom connectors for the TPS.

thenick

4,027 posts

242 months

Thursday 24th January 2008
quotequote all
Couldn't find any for mine so I just connected the new wires to the old plug using soldering and heat shrink wrap to ensure the connection is sealed. With the loom tape covering the wires it looks exactly as it used to and retains the old plug...

GreenV8S

31,027 posts

314 months

Thursday 24th January 2008
quotequote all
chrispitman said:
Thanks.

Any ideas on where to get a replacement loom connectors for the TPS.
Hmmm. I'm sure I've seen them somewhere, but I can't for the life of me remember where. If it comes back to me I'll let you know.

paulathome

686 posts

248 months

Thursday 24th January 2008
quotequote all
Hi,
You could try here for your connectors.
No personal interest in the company just noted it a couple of months ago for bits for my Mega squirt install.
Paul.
http://trigger-wheels.com/store/index1.html

GreenV8S

31,027 posts

314 months

Thursday 24th January 2008
quotequote all
paulathome said:
Hi,
You could try here for your connectors.
No personal interest in the company just noted it a couple of months ago for bits for my Mega squirt install.
Paul.
http://trigger-wheels.com/store/index1.html
Trigger wheels are the only source I've found so far for the Ford coil connectors, but I should point out that the other connectors are commonly available far cheaper than that.

spend

12,581 posts

281 months

Thursday 24th January 2008
quotequote all
Are all the TPS connectors the same?, I have it in my head that there may be 2 versions....

Dave

andy-w

1,987 posts

256 months

Thursday 24th January 2008
quotequote all
http://www.autoelectricsupplies.co.uk

not sure if they are any good???

Pupp

13,010 posts

302 months

Thursday 24th January 2008
quotequote all
GreenV8S said:
paulathome said:
Hi,
You could try here for your connectors.
No personal interest in the company just noted it a couple of months ago for bits for my Mega squirt install.
Paul.
http://trigger-wheels.com/store/index1.html
Trigger wheels are the only source I've found so far for the Ford coil connectors, but I should point out that the other connectors are commonly available far cheaper than that.
These guys do them and are quick http://www.motoscope.co.uk/engine_tuning.htm

chrispitman

Original Poster:

742 posts

284 months

Friday 25th January 2008
quotequote all
Thanks for your help I will give them a call.