Front Wheel Alignment

[whitechimp500]

Does anyone know the setting data for Chimaera ?
In this case ,'98 500 with 225 section front tyres and Power steering.
Thanks,
Darren.

[mac5]

posted a similar thread a couple of weeks ago for settings for a four wheel alignment machine.But had no response.

Come on guys someone out there must no the settings.

Thanks

MAC

[elwood]

Tracking 20 minutes toe in, Camber 3/4 degree negative, this applies to front and rear.

[whitechimp500]

Thanks elwood

[the dodger]

Don't know if it's different on a 500 but factory gave the following for mine ('94 4.3):
Toe in: 0-10 deg front, 20-30 deg rear.
Camber: -0.75 +/- 0.25 front and rear.

Oops! spot deliberate mistake! Toe in values are minutes, not degrees! Tyres would probably last about a mile at those settings! Make sure camber is same front and rear.

>> Edited by the dodger on Wednesday 30th July 14:14

[RichB]

Racing Green set mine a few months ago and the difference was remarkable. It's now set at:-

rear
toe-in +0 deg 11 mins left +0 deg 9 mins right
camber -1 deg 25 min left -1 deg 17 min right

Front
toe-in +0 deg 10 min L +0 deg 9 min R
camber -1 deg 07 min L -1 deg 07 min R

Rich...