rear disc's?

[mak]

I do appologise for my lazyness in searching for this one but i need to get a set of rear discs for my 99 5ltr so if anyone could give me the ball park ford parts to purchase from before i whip mine off tomorrow i would be greatfull but if there anything like my fronts where to match up i'll probbably be down the factors more than once anyway, i was told the fronts should be the same as a 4x4 cosworth seira then a xr4i then possably a granada in the end if memeory servrs me right i couldn't get the right height so had to remove the origanal spacers on the calipers, any way hears hoping my rears are a little easyer to find.

[Aussie John]

Try Brake Engineering at Wrexham Industrial Estate, very reasonable for all discs and pads, cheers, John.

[mak]

Cheers guys but my thinking was more of a standard brake disc from a motor factor and an idea of wot to pitch it against for reference as in granada 4x4 ect ect.

[daz the plumber]

ive just had fitted new braded hoses , green stuff pads and a full set of ebc turbo grooved discs, they are fantastic i can`t beleive the difference and there smaller discs 240mm front and 252 mm rear .

[TVR SUPPLIES]

mak said:

Cheers guys but my thinking was more of a standard brake disc from a motor factor and an idea of wot to pitch it against for reference as in granada 4x4 ect ect.

For the 5 litre cars TVR usually fitted the 273mm dia disc at the rear.It should be a Ford Sierra 2.0 RS Cosworth 4x4 1990-1993.This is Quinton Hazel part no. BDC 3807.
Hope this helps.

[mak]

thanks again chaps, note to self dont be lazy and use the search function properly there must of been a million bits of info on there i needed, any way jobs done. :-)