coil

[dings]

Fitting a new coil the weekend, had a look for a thread of how to cant find one, anyone any ideas where I can find any instructions of how to being a complete mechanical numpty I need something.

[Slacey]

It's really simple, just make notes of the wire connections as you disassemble the old one and install in reverse order when fitting the new one. Should only take you 20 minutes or so.

[fenderbender]

Coil should be attached to a bracket which is held in place by one plenum chamber cover bolt. It makes life easier just to undo this bolt and bracket. Gives easy access to the coil retaining bolts and all the electrical connections.

[thegman]

Slacey said:

It's really simple, just make notes of the wire connections as you disassemble the old one and install in reverse order when fitting the new one. Should only take you 20 minutes or so.

it normally is pretty obvious as the pos has a different connector to the negs.

this is an easy job BUT BE CAREFUL OF LOSING THE WASHERS AND LITTLE NUTS. you have been warned

[dings]

Hoorah, new coil fitted my first bit of mechanics on my Chim with no problems.

[Slacey]

Cam change next?