Anyone got a R/Rover ECU EPROM

[MikeTVR]

Following the recent topic regarding the calibration of the AFM it's got me thinking about the cause of the shunting effects below 2200RPM on my 4.0HC.
I'd like to see the difference that a straight Range-Rover chip makes before spending time and money on a smoother cam. If it makes a difference then I would modify my spend towards a Mark Adams re-chip.
Happy to pay small cost, or can return, or both. Alternatively if someone has object code I can probably get it downloaded to a new EPROM.

Mike

[blitzracing]

I have the codes for various rechips (as in .bin files)if you send me an email address but dont go down the Range Rover Route, its just too lean up top. I did try a combination of JE engineering, TVR and Range Rover chips on one car, and it made no difference. The Tornado (not tested one of these) might work, but its an expensive way out, as is the cam. Hold fire, as "That Daddy" is testing out an AFM Ive modified on a car with the problems. Baited Breath as they say

Mark