What holds in the ashtrays?

[nia198]

The one in the drivers door keeps poping out when the door shuts. Should it be glued back in or is there something else that should hold it in?

[Chim Chim Cheree]

Mine's held in with friction and a prayer, which I think is the same thing that is holding the diff in at the mo...

eta, I know this because the whole thing came out in my hand when I tried to empty it recently. The ash tray, that is. Not the diff.

Edited by Chim Chim Cheree on Saturday 21st June 01:19

[Littletidnock]

I have only had mine a week or two, when I first tried a sharpish set off from some traffic lights the horn button fell out and dangled on the wires and the round ally light switch came off and shot under the seat.

[MADMAX2]

What i did with my ashtrays was custom made a wedge (not the TVR one!) and gently forced the ashtrays back in the hole it sits tight and not a prob since!

[V8 Animal]

Spot of silicone will do it

[Torquemada]

Mine are built up with insulating tape to provide a friction fit. TVR quality workmanship!