Discussion
If your car is an earlier model pre-97 the number plate is illuminated by bulb holders behind the plate. Therefore the plate has to be translusent otherwise it should & would fail an MOT.
On the later models the number plate was slanted & the bulb holders shine onto the face of the plate & anyway the panel the plate sits against is solid so would reflect
Perhaps a current MOT tester could clarify but I have never heard of a number plate failing for speed camera reading. If the digits are incorrectly spaced or incorrect sized then yes this can fail.
The most common reason for Griff's & Chims to fail on number plate issues is because they DO NOT have a translusent plate fitted.
I would check this pretty damn pronto because if yours is the earlier type the next time you drive in the dark you may have the
breathing down your neck.
Bodders
On the later models the number plate was slanted & the bulb holders shine onto the face of the plate & anyway the panel the plate sits against is solid so would reflect

Perhaps a current MOT tester could clarify but I have never heard of a number plate failing for speed camera reading. If the digits are incorrectly spaced or incorrect sized then yes this can fail.
The most common reason for Griff's & Chims to fail on number plate issues is because they DO NOT have a translusent plate fitted.
I would check this pretty damn pronto because if yours is the earlier type the next time you drive in the dark you may have the
breathing down your neck.Bodders
Edited by Bodmin on Tuesday 2nd September 22:46
Edited by Bodmin on Tuesday 2nd September 22:59
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





