Boot wont lock anymore....
Discussion
Hi, 98 Chimaera...
The boot has just started NOT locking. I.e. when i push the bootlid down the catch does not hold it shut. I have taken the catch off and mechanically it is fine (it locks in the closed position) but when refitted to the car it does NOT work fine. I know that it only takes a small amount of pull on the cable to unlock the boot. Soooooo I am thinking that the solenoid has stuck in the "unlock" position
Can anyone tell me where the solenoid actually is so that i can take a look at it?
Thanks
The boot has just started NOT locking. I.e. when i push the bootlid down the catch does not hold it shut. I have taken the catch off and mechanically it is fine (it locks in the closed position) but when refitted to the car it does NOT work fine. I know that it only takes a small amount of pull on the cable to unlock the boot. Soooooo I am thinking that the solenoid has stuck in the "unlock" position
Can anyone tell me where the solenoid actually is so that i can take a look at it?
Thanks
rolling_thunder said:
Guys - thanks for all the help with adjustments BUT i am asking where the solenoid is...
Looking into the boot from the rear, the solenoid is sited around 7" towards the offside, under the vertical carpet. Just follow the release cable's route. It does (should) allow for a fair bit of slack at the final end so it may appear loose- though there's enough pull from the mechanism for the latch to open. Simple once you see it.Edited by kenny Chim 4 on Tuesday 23 September 00:34
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



