What size??

[chris43]

.o
What size socket is required to remove the stepper motor as I need to buy one at Halfwits.

[Incorrigible]

Spanner is the better option, can't remember the size sorry (although 36mm rings a bell)

A decent halfwits should let you check

[Incorrigible]

Where abouts in Kent are you, I'f you fancy a blast over to West Sussex, a free removal and refitting service awaits you

[Big Al.]

chris43 said:

What size socket is required to remove the stepper motor as I need to buy one at Halfwits.

IIRC 32mm, but it could be 34 to know TVR.

I personally use a pair of parrot grips with tapped jaws, shouldn't be tight to undo and shouldn't need much more the slightly over hand tight to seal.

>> Edited by Big Al. on Monday 29th September 17:17

[chris43]

Incorrigible said:

Where abouts in Kent are you, I'f you fancy a blast over to West Sussex, a free removal and refitting service awaits you

I'd love to take you up on the offer but can't use the car until I sort out a small problem which I believe to be the s/m.
Cheers any way.
I live in Maidstone by the way!

[Trefor]

Use a large adjustable type spanner of grips are best - should be too tight anyway, and you shouldn't do it up too tight either.

[2 sheds]

Its 32mm BTW
Tim

[chris43]

2 sheds said:

Its 32mm BTW Tim

Mucho grassy arse!