my next project
Discussion
my next project fuel injection http://i348.photobucket.com/albums/q348/daztheplum...
i would love to lift my bonnet and see that ,here is a full run down how the guy built it, its not carbs ,full injection with meagasquirt ,im amazed, wish it was a bolt on kit .http://www.britishv8.org/Articles/MGB-V8-Supercharger.htm
Edited by daz the plumber on Monday 8th December 23:13
daz the plumber said:
my next project fuel injection http://i348.photobucket.com/albums/q348/daztheplum...
so is your project fuel injection or supercharger or boththegman said:
daz the plumber said:
my next project fuel injection http://i348.photobucket.com/albums/q348/daztheplum...
so is your project fuel injection or supercharger or both
Seems a suitable plumbers solution 
spend said:
thegman said:
daz the plumber said:
my next project fuel injection http://i348.photobucket.com/albums/q348/daztheplum...
so is your project fuel injection or supercharger or both
Seems a suitable plumbers solution 
A wee drop of nitrous instead!
Good luck with the supercharger install, here's one I prepared earlier on my Wedge!

If you need any info or help....give me a shout.
Chedder
i was joking about the project , i don`t have a clue , i just liked the picture ,did you build your own and what bhp do you have .i wonder why people don`t go for the more traditional super charger . you can get a bolt on super charger kit for for a mgb why not a v8 .how does your`s work as the other charger does not use the plenum . http://www.britishv8.org/Articles/MGB-V8-Superchar... copy and paste this ,there is a full page on it .
Edited by daz the plumber on Tuesday 9th December 18:41
daz the plumber said:
i was joking about the project , i don`t have a clue , i just liked the picture ,did you build your own and what bhp do you have .i wonder why people don`t go for the more traditional super charger . you can get a bolt on super charger kit for for a mgb why not a v8 .how does your`s work as the other charger does not use the plenum . http://www.britishv8.org/Articles/MGB-V8-Superchar... copy and paste this ,there is a full page on it .
Hi Daz, not that difficult to fit really, fair amount of head and ass scratching on where to locate the M90 blower and intercooler pipework without modding the body, bonnet or inner wing, Practical Performance Car mag ran a series of articles about a year ago and I just followed them more or less.Edited by daz the plumber on Tuesday 9th December 18:41
Car is converted from a V6 to a 3.5L and makes around 285hp at the flywheel on 5 lbs of boost plus an extra 50hp on the nitrous. Just about to bin the lucas EFI system in favour of an Emerald ecu with coil packs, so that should liberate a few more ponies and more money from my wallet!
GO ON GO ON GO ON........You know you want one!

Edited by chedder on Tuesday 9th December 19:28
chedder said:
daz the plumber said:
i was joking about the project , i don`t have a clue , i just liked the picture ,did you build your own and what bhp do you have .i wonder why people don`t go for the more traditional super charger . you can get a bolt on super charger kit for for a mgb why not a v8 .how does your`s work as the other charger does not use the plenum . http://www.britishv8.org/Articles/MGB-V8-Superchar... copy and paste this ,there is a full page on it .
Hi Daz, not that difficult to fit really, fair amount of head and ass scratching on where to locate the M90 blower and intercooler pipework without modding the body, bonnet or inner wing, Practical Performance Car mag ran a series of articles about a year ago and I just followed them more or less.Edited by daz the plumber on Tuesday 9th December 18:41
Car is converted from a V6 to a 3.5L and makes around 285hp at the flywheel on 5 lbs of boost plus an extra 50hp on the nitrous. Just about to bin the lucas EFI system in favour of an Emerald ecu with coil packs, so that should liberate a few more ponies and more money from my wallet!
GO ON GO ON GO ON........You know you want one!

Edited by chedder on Tuesday 9th December 19:28
Be interested to see some shots of the mountings etc

Pupp said:
chedder said:
daz the plumber said:
i was joking about the project , i don`t have a clue , i just liked the picture ,did you build your own and what bhp do you have .i wonder why people don`t go for the more traditional super charger . you can get a bolt on super charger kit for for a mgb why not a v8 .how does your`s work as the other charger does not use the plenum . http://www.britishv8.org/Articles/MGB-V8-Superchar... copy and paste this ,there is a full page on it .
Hi Daz, not that difficult to fit really, fair amount of head and ass scratching on where to locate the M90 blower and intercooler pipework without modding the body, bonnet or inner wing, Practical Performance Car mag ran a series of articles about a year ago and I just followed them more or less.Edited by daz the plumber on Tuesday 9th December 18:41
Car is converted from a V6 to a 3.5L and makes around 285hp at the flywheel on 5 lbs of boost plus an extra 50hp on the nitrous. Just about to bin the lucas EFI system in favour of an Emerald ecu with coil packs, so that should liberate a few more ponies and more money from my wallet!
GO ON GO ON GO ON........You know you want one!

Edited by chedder on Tuesday 9th December 19:28
Be interested to see some shots of the mountings etc

The 'before' shot

New big valve heads

Mocking up the mounting for the blower

Shot of the finished mounting plate

Nearly there shot!

Intercooler trial fitting

The beasty back on the road

Seems strange posting Wedge pics on the Chim section! So apologies in advance
daz the plumber said:
why is it the picture i posted have the blower sitting on the engine and the inlet plenum as been removed .www.britishv8.org/Articles/MGB-V8-Supercharger.htm
This may shed some light on whyhttp://www.v8engines.com/engine-3b-big-1.htm#Middl...
, i have not seen any one with the same set up .how does it work ,the plenum as gone but the fuel injection and everything else is there .have agood look at this http://www.britishv8.org/Articles/MGB-V8-Superchar...
Edited by daz the plumber on Wednesday 10th December 21:08
copy and paste Edited by daz the plumber on Wednesday 10th December 21:22
daz the plumber said:
, i have not seen any one with the same set up .how does it work ,the plenum as gone but the fuel injection and everything else is there .have agood look at this http://www.britishv8.org/Articles/MGB-V8-Superchar...
Hi Daz, the problem with the Eaton M90 type of blower is the relatively small outlet (approx 4" square) compared to the top of the inlet manifold ( 13" x 4") if mounting the blower on the top of the engine, this can cause issues getting good airflow to all cylinders. If you have a very tall engine bay then it isn't much of an issue but as can be seen in the photos, the MGB and my Tasmin have very little clearance between the top of the engine and the bonnet, and the MGB has used a very flattened inlet manifold to achieve clearance, I retained the plenum to get equal flow to all 8 cylinders but had to side mount the blower as a result and enable me to use an intercooler.Edited by daz the plumber on Wednesday 10th December 21:08
copy and paste Edited by daz the plumber on Wednesday 10th December 21:22
Yanks overcome the clearance problems by mounting the blower much higher normally above a charge cooler and you often see them with it stuck through the top of the bonnet or hidden under a huge bonnet bulge....looks great! But crap for forward visability.
Have to resurrect this thread - i put my Honda Blackbird up for sale and jokingly mentioned that i would take a supercharger for a Chim in part-ex.
Got a phone call from a chap saying he has a brand new Eaton M90 in a box and offering me a good deal to swap for the bike+cash.
SO - anyone mounted an M90 to a Chim, and if so was in "on top" or off to the side? I'm not keen on the "on top" idea due to the airflow (as has been discussed) but an installation like that shown in the wedge earlier in this thread (very nice!) would tempt me, i'm just not sure the Chim engine bay has the width to accomodate that sort of install.
Anyone shed any light? Thanks.
Got a phone call from a chap saying he has a brand new Eaton M90 in a box and offering me a good deal to swap for the bike+cash.
SO - anyone mounted an M90 to a Chim, and if so was in "on top" or off to the side? I'm not keen on the "on top" idea due to the airflow (as has been discussed) but an installation like that shown in the wedge earlier in this thread (very nice!) would tempt me, i'm just not sure the Chim engine bay has the width to accomodate that sort of install.
Anyone shed any light? Thanks.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff







