hazards not working

[matt12023]

alright

seems as its mot time i've been putting this off long enough,basically the hazards dont work, symptoms are no hazards and the switch doesnt light up when pressed either, indicators work fine.

its had the radio changed so my first thoughts are to pull that out and checkt that nothing was disturbed on the back of the switch when that was changed. does it have a separate flash unit for the hazards? if so where does it live?

thanks

[wheels1]

On other cars i have owned, the same relay do's both hazards and indicators.
I would try the switch first and the connectors on to it.
First try turning it on and off loads of times, as the switch only usually gets used at mot times, it can get sticky. If that do's not work, take a look at the connectors on the back of the switch.

[Ribol]

matt12023 said:

......its had the radio changed so my first thoughts are to pull that out and checkt that nothing was disturbed on the back of the switch when that was changed.

Ribbon cable fallen off the back of the switch when the radio was swapped

[matt12023]

cheers guys, i'll check it out asap, lets hope i can get the radio out and in again without cracking my wood

[lesstatt]

matt12023 said:

cheers guys, i'll check it out asap, lets hope i can get the radio out and in again without cracking my wood

ooooooooooooo errrrrrrrrrrrrrrrrrrrrrrr missus