Windows Slow to go up or down
Windows Slow to go up or down
Author
Discussion

davers_uk

Original Poster:

22 posts

214 months

Saturday 10th January 2009
quotequote all
I have just purchased my first TVR.... A 450 Chimaera 1999. The windows are very slow to move and was wondering if this is common or are there any fixes for this. Regards Martin

spend

12,581 posts

282 months

Saturday 10th January 2009
quotequote all
Quick tips are probably to spray the channels with a little silicone spray for rubber and to leccy grease the connectors behind the speakers. Other adjustments require greater 'surgery' so I'd try those first since they may just fix it assuming the car may have had limited usage just before you bought it.

bjshipway

31 posts

231 months

Sunday 11th January 2009
quotequote all
hi there - there's a good article on chimaera pages about this.

this chap greased the windows spring spindal with copper grease

see link here http://www.chimaerapages.com/resources_window.php

Del 203

12,728 posts

280 months

Sunday 11th January 2009
quotequote all
Or you can add extra relays so they get the full voltage biggrin


& No.... I cant do a wiring diagram coz im st with sparky bits hehe


Someone very kindly made this up for me smile

spend

12,581 posts

282 months

Sunday 11th January 2009
quotequote all
That always seems a good idea, instead of making sure the connectors, wiring, switches and existing relays are in GWO rofl... Just move the problem somewhere else and as that deteriorates just keep adding relays on top of each other......................

Finding where the voltage drop is and fixing that would seem the sensible approach to me, unless you are in the business of selling 'bolt on goodies'? I have really seen no evidence of TVR speccing undersized cables, switches and connectors on the other hand can get cruddy and build up resistance. Good leccy grease once stuffed down these components should keep them in GWO unless your car is a fish tank wink

slideways

4,101 posts

252 months

Sunday 11th January 2009
quotequote all
check that the rubber in the channel at the lock side of the door hasn't slipped down mine does now and again

Del 203

12,728 posts

280 months

Sunday 11th January 2009
quotequote all
spend said:
That always seems a good idea, instead of making sure the connectors, wiring, switches and existing relays are in GWO rofl... Just move the problem somewhere else and as that deteriorates just keep adding relays on top of each other......................
Dont know were its leaking sparky bits but had cleaned, greased all connections, checked the runs & siliconed them, was still slow without the extras bits frown


Fine as soon as they went on & will be staying on biggrin

tongue out

David Beer

3,982 posts

298 months

Sunday 11th January 2009
quotequote all
Spend, ffs as they say, do you not stop knocking anybody but yourself ? Put a relay in it.

davers_uk

Original Poster:

22 posts

214 months

Sunday 11th January 2009
quotequote all
Thanks for all your help, I will take a look at this during the week and get back with the result. martin

spend

12,581 posts

282 months

Sunday 11th January 2009
quotequote all
David Beer said:
Spend, ffs as they say, do you not stop knocking anybody but yourself ? Put a relay in it.
David as far as I can see your 'put a relay in' is a constant knocking of TVR's original design wink reducing the load across the immob. is fine, but this intimation that TVR wiring looms are sub-standard is insulting to the marque IMHO biggrin If the problem is a frayed wire to ground your relay solution is going to do FA anyway AFIK?

OP save your money & put them towards some decent lights hehe

Inny

456 posts

228 months

Sunday 11th January 2009
quotequote all
David Beer said:
Put a relay in it.
Is that advice or an insult?

schmokin1

1,223 posts

243 months

Monday 12th January 2009
quotequote all
spend said:
Quick tips are probably to spray the channels with a little silicone spray for rubber and to leccy grease the connectors behind the speakers. Other adjustments require greater 'surgery' so I'd try those first since they may just fix it assuming the car may have had limited usage just before you bought it.
I went in to my local friendly factor and asked for silicone spray and leccy grease. He said does he look like he stocks gimping accessories confused

Anyone know where I can get some spray and what is leccy grease anyway? Do I need to make sure the wife doesn't read this thread over my shoulder?biggrin

spend

12,581 posts

282 months

Monday 12th January 2009
quotequote all
Even Halfords sell silicone spray lubricant, Maplins 'Multi Purpose Silicone Grease' is an example of grease suitable for electrical contacts.

Many used to pack the connectors with vaseline so seal them & prevent corrosion, I just think there are better greases like the one above, after experiencing very hot climes and pools of vaseline under connector blocks hehe