Charlie's ECU questions thread
Discussion
Since there are sure to be lots more questions, I thought i'd start one thread for them all.
Latest problem, the loom i have here from which i copying lengths and connectors from does not appear to have a speed sensor input (pin 6) Has anybody any idea where in the car this pin goes, and what sort of plug is on the end?
Cheers,
Charlie.
Latest problem, the loom i have here from which i copying lengths and connectors from does not appear to have a speed sensor input (pin 6) Has anybody any idea where in the car this pin goes, and what sort of plug is on the end?
Cheers,
Charlie.
On my car (98)the speed sensor comes up from the sensor under the center console below the cubby hole/ bits box near your left elbow. This is a two pin connector. It then goes along the centre console where it goes into yet another two pin connector. It then goes up in to the dash and goes to a small black plastic box with not a lot in it. This box has either six or eight pins on the connector (can't remember) and I think it doubles the frequency of the pulses coming from the speed sensor and may square up the waveform as well before going on to the ECU. This box has to be in circuit for the speedo to work although the output from the speedo sensor is not changed by the circuit in the box but merely passes through it and on to the speedo input.
Hope this helps.
Paul.
Hope this helps.
Paul.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


