Wideband sensor Q`s
Wideband sensor Q`s
Author
Discussion

Meatball

Original Poster:

1,638 posts

241 months

Wednesday 14th January 2009
quotequote all
Could a wideband sensor boss be fitted on the y piece without taking it out, and does it have to be after the main cat?
Thanks

GreenV8S

31,027 posts

315 months

Wednesday 14th January 2009
quotequote all
It would usually go upstream of the cat. You would need to cut and weld it which might be possible in the car but will be much much easier if you take it out. Doing it in situ would also mean stuff dropping into the top of the cat which isn't good news. I can't think of any good reason to do it in situ.

Meatball

Original Poster:

1,638 posts

241 months

Wednesday 14th January 2009
quotequote all
I only asked as the exhaust is a PITA to take off and put back on by yourself.

The search is working now and have found some examples.biggrin

GreenV8S

31,027 posts

315 months

Wednesday 14th January 2009
quotequote all
I can get the Y piece off the V8S without disturbing the exhaust at all. Maybe the alignment is different on yours, but I would have thought at the worst you would need to undo the mounts and pull it back a couple of inches rather than wriggle it right out of the chassis.

Meatball

Original Poster:

1,638 posts

241 months

Wednesday 14th January 2009
quotequote all
While your here, which wideband sensor would you recommend theres a few post on here saying that the LC-1`s is a bit hit and miss?

GreenV8S

31,027 posts

315 months

Wednesday 14th January 2009
quotequote all
I hear the same stories about the LC1. I don't have enough experience of them to know how reliable they are, but I haven't had any problems with mine so far. There are quite a few alternatives, mostly using the same sensor. I have also got a Zeitronix ZT-1 which combines several sensors including wideband lambda and EGT onto a fairly slim digital display with logging output. Unfortunately I managed to wipe out the loom for this during a small engine bay fire (white hot exhausts don't get on well with oil hoses as it turns out) so haven't had a chance to use it much. It's a nice bit of kit though.

Meatball

Original Poster:

1,638 posts

241 months

Thursday 15th January 2009
quotequote all
GreenV8S said:
I hear the same stories about the LC1. I don't have enough experience of them to know how reliable they are, but I haven't had any problems with mine so far. There are quite a few alternatives, mostly using the same sensor. I have also got a Zeitronix ZT-1 which combines several sensors including wideband lambda and EGT onto a fairly slim digital display with logging output. Unfortunately I managed to wipe out the loom for this during a small engine bay fire (white hot exhausts don't get on well with oil hoses as it turns out) so haven't had a chance to use it much. It's a nice bit of kit though.
Thanks Peter i think i`ll drop adyw a line as i think hes just fitted one in his griff