Removing lower veneer radio panel
Discussion
I'm intrigued. The metal panel has a veneer stuck to it. How could a French polisher "fill-in". Can understand a wooden table and a "mark" or a "repair" to that ??
Anyway, if you have an early model (93 to 95-ish ??), then the following should apply (or get the Bible ??).
You remove your radio. There are 2 screws left and right of the radio apature. Remove them. The panel can then move forward (towards you). There are plugs to be removed to allow the wiring harness to come with the panel.
You then have to "remove" the switches from the metal back plate. You are then left with the plate and stuck-in plastic indicators.
Hope that helps.
Trev
Anyway, if you have an early model (93 to 95-ish ??), then the following should apply (or get the Bible ??).
You remove your radio. There are 2 screws left and right of the radio apature. Remove them. The panel can then move forward (towards you). There are plugs to be removed to allow the wiring harness to come with the panel.
You then have to "remove" the switches from the metal back plate. You are then left with the plate and stuck-in plastic indicators.
Hope that helps.
Trev
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




Label ALL the wires CLEARLY BEFORE you unplug anything.