wiring a bosch afm
Discussion
Hi All
i would like to fit a bosch airflow meter. can any one tell me if i can use the same loom plug that the standard one uses or do i have to use a different one, if so hows it wired? Will it have to be mapped to work or can it be driven once fitted to somewhere that does mapping also does anyone have a picture of one so i know i have the right one.
Thanks
Rich
i would like to fit a bosch airflow meter. can any one tell me if i can use the same loom plug that the standard one uses or do i have to use a different one, if so hows it wired? Will it have to be mapped to work or can it be driven once fitted to somewhere that does mapping also does anyone have a picture of one so i know i have the right one.
Thanks
Rich
Edited by slideways on Wednesday 14th January 19:00
The Bosch unit is off the later Sagem system I think, but can be used. It is missing the CO trim pot, so one has to be wired into the loom, plus it definately needs a remap. Bit more about it on the RPI web site:
http://www.v8engines.com/carbs-2.htm
Mark
http://www.v8engines.com/carbs-2.htm
Mark
blitzracing said:
The Bosch unit is off the later Sagem system I think, but can be used. It is missing the CO trim pot, so one has to be wired into the loom, plus it definately needs a remap. Bit more about it on the RPI web site:
http://www.v8engines.com/carbs-2.htm
Mark
http://www.v8engines.com/carbs-2.htm
Mark
just been on RIP's website and mine doesnt look the same as the one in there picture i have a Range rover with the sagem's maf meter and the one i have for the tvr doesnt have a box on the side just a socket unfortunatly im at work for the next 10 days so cant upload a picture of it, i purchased it from a fellow tiv owner as a bosch airflow metre for upgrading the original so maybe its the wrong one?
just found this picture on flea bay looks the same Edited by slideways on Sunday 18th January 20:48
slideways said:
blitzracing said:
The Bosch unit is off the later Sagem system I think, but can be used. It is missing the CO trim pot, so one has to be wired into the loom, plus it definately needs a remap. Bit more about it on the RPI web site:
http://www.v8engines.com/carbs-2.htm
Mark
http://www.v8engines.com/carbs-2.htm
Mark
just been on RIP's website and mine doesnt look the same as the one in there picture i have a Range rover with the sagem's maf meter and the one i have for the tvr doesnt have a box on the side just a socket unfortunatly im at work for the next 10 days so cant upload a picture of it, i purchased it from a fellow tiv owner as a bosch airflow metre for upgrading the original so maybe its the wrong one?
just found this picture on flea bay looks the same Edited by slideways on Sunday 18th January 20:48
K4000JB said:
slideways said:
blitzracing said:
The Bosch unit is off the later Sagem system I think, but can be used. It is missing the CO trim pot, so one has to be wired into the loom, plus it definately needs a remap. Bit more about it on the RPI web site:
http://www.v8engines.com/carbs-2.htm
Mark
http://www.v8engines.com/carbs-2.htm
Mark
just been on RIP's website and mine doesnt look the same as the one in there picture i have a Range rover with the sagem's maf meter and the one i have for the tvr doesnt have a box on the side just a socket unfortunatly im at work for the next 10 days so cant upload a picture of it, i purchased it from a fellow tiv owner as a bosch airflow metre for upgrading the original so maybe its the wrong one?
just found this picture on flea bay looks the same Edited by slideways on Sunday 18th January 20:48
Rich
slideways said:
its got PBT-GF30 on the side and has an 83mm internal diameter, its for a 4 ltr
Rich
Good news for you - mine has the serial PBT GF30 Rich
Edited by slideways on Thursday 15th January 09:27
and it was the big bosch that Mark Adams was fitting as a upgrade to TVR's.. unlike some earlier AFM's - it does not have a co trim screw - so a seperate small trim mechanism was fitted to mine (14 cux).
Not had a change to check wiring much but did find the following :
(Mesh)
^
|
|
Space
Brown
Red
Blue
Blue
Not sure what pins of ecu they go you at moment.
rev-erend said:
slideways said:
its got PBT-GF30 on the side and has an 83mm internal diameter, its for a 4 ltr
Rich
Good news for you - mine has the serial PBT GF30 Rich
Edited by slideways on Thursday 15th January 09:27
and it was the big bosch that Mark Adams was fitting as a upgrade to TVR's.. unlike some earlier AFM's - it does not have a co trim screw - so a seperate small trim mechanism was fitted to mine (14 cux).
Not had a change to check wiring much but did find the following :
(Mesh)
^
|
|
Space
Brown
Red
Blue
Blue
Not sure what pins of ecu they go you at moment.
Rich
slideways said:
rev-erend said:
slideways said:
its got PBT-GF30 on the side and has an 83mm internal diameter, its for a 4 ltr
Rich
Good news for you - mine has the serial PBT GF30 Rich
Edited by slideways on Thursday 15th January 09:27
and it was the big bosch that Mark Adams was fitting as a upgrade to TVR's.. unlike some earlier AFM's - it does not have a co trim screw - so a seperate small trim mechanism was fitted to mine (14 cux).
Not had a change to check wiring much but did find the following :
(Mesh)
^
|
|
Space
Brown
Red
Blue
Blue
Not sure what pins of ecu they go you at moment.
Rich
These are the standard wire colours
Red/black. Ground
Blue/Green Air flow signal- should be .2-.7 volts (no air flow). Tick over on the 3.9 is about 1.7 volts
Brown Orange +12v
Blue/red CO trim value.
Mark
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


