Hub Centre Bore?
Discussion
Can anyone confirm the centre bore diameter of the hubs? I think the hubs are Ford which should mean the diameter is 63.3mm. Hopefully someone could confirm before i order some expensive Eibach wheel spacers.
FYI, i'm soon to be ordering new wheels after years of searching.
FYI, i'm soon to be ordering new wheels after years of searching.
jsr in the 'Pics of Chimaeras with after-market alloys' thread said:
Ok, this will probably prompt a few negative comments but i've found the wheels i will be getting (after several years of searching!). See photoshopped image below - i really think the gun metal suits the colour of my car

They are Inovit ST VI in Gunmetal. Size 7.5x18" 4x108 ET38. Will use 10mm Eibach spacers on front, 5mm spacers on rear. Will be limited to 225 rear tyre, but my car is a 400 so this is the standard width. 205/35 front and 225/40 rear will keep overall wheel height pretty much same as the originals.
I'm happy to trade some ride comfort for style!!!

They are Inovit ST VI in Gunmetal. Size 7.5x18" 4x108 ET38. Will use 10mm Eibach spacers on front, 5mm spacers on rear. Will be limited to 225 rear tyre, but my car is a 400 so this is the standard width. 205/35 front and 225/40 rear will keep overall wheel height pretty much same as the originals.
I'm happy to trade some ride comfort for style!!!
jsr said:
Can anyone confirm the centre bore diameter of the hubs? I think the hubs are Ford which should mean the diameter is 63.3mm. Hopefully someone could confirm before i order some expensive Eibach wheel spacers.
The standard Ford 4 stud hub is a 3" square stud pattern with a 2.5" center bore. If you're spending money based on this I would suggest you measure it for yourself to make sure.Gassing Station | Chimaera | Top of Page | What's New | My Stuff


