Damp Distributor / HT leads - Help!!!
Damp Distributor / HT leads - Help!!!
Author
Discussion

ZGR

Original Poster:

14 posts

220 months

Saturday 24th January 2009
quotequote all
It appears that my chim is suffering from damp, every time I go to start it, it wont unless I leave it in the sun for a while! This is a problem that is only occurring during these cold months. I have come to the conclusion that it is an electrical fault caused by moisture or dampness of the distributor or solenoid. I had this on a previous vehicle and solved it by using a plastic bag to protect the electrics from the elements - I fear given the heat that is produced, this method will just melt!

Anyone had similar problems, how can I help it!??

kevin63

4,661 posts

284 months

Saturday 24th January 2009
quotequote all
Give it all a spray with WD40, it worked for me when I had some old cars, it's supposed to chase water away and prevent it from getting damp.

paulathome

686 posts

249 months

Sunday 25th January 2009
quotequote all
May be worth replacing the distributor cap and rotor arm.
You may have a hairline crack which is causing the spark to track around the wall of the dissy rather than out of the post to the HT lead.
Might also be worth a new set of HT leads while your at it, these can break down over time with the high engine bay temperatures.
Hope this helps.
Paul.

scotty_d

6,795 posts

225 months

Sunday 25th January 2009
quotequote all
kevin63 said:
Give it all a spray with WD40, it worked for me when I had some old cars, it's supposed to chase water away and prevent it from getting damp.
yes

Cant go wrong with a light spray of good old water displacement 40

Edited by scotty_d on Sunday 25th January 14:57

ZGR

Original Poster:

14 posts

220 months

Monday 26th January 2009
quotequote all
Cheers chaps, tried th WD40 trick but to no avail - off in search of a new dizzy cap and leads now - thanks