imola 16" wheels on the front.
Discussion
chrispitman said:
I have 16" all round with 225/45 front and 245/45 rear. Remember you will need to fit some rack stops as one of the fronts will hit the wish bone on 16"'s
Many have said they didn't need them, but I agree that fitting them is a no brainer. Only if you check all angles at all travels of suspension for clearance (and over & over again if you change any geo settings..) would I be tempted not to fit them.If you're planning to use rear Imolas, the offset for the front is wrong.
The fronts need to be et25,so if you have an et33 (Imola rear),then you ought to use a spacer of 8 or 10mm to get it back to the et25 offset.
This then throws into question the length of your studs,ie are they still long enough? I think usually they are still ok with an 8mm spacer,but check!
You should also take the Spend suggestions of checking clearance as well, or obviously !!
The fronts need to be et25,so if you have an et33 (Imola rear),then you ought to use a spacer of 8 or 10mm to get it back to the et25 offset.
This then throws into question the length of your studs,ie are they still long enough? I think usually they are still ok with an 8mm spacer,but check!
You should also take the Spend suggestions of checking clearance as well, or obviously !!
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


