BTR diff oil change
Discussion
The drain is the very bottom bolt on the back cover (it looks just like one of the other bolts) and the filler is in front of the drive coupling on the drivers side (RHD) and is a large flat nut. Draining is easy, filling up not quite so. The correct oil (ep 80/140)is like treacle, I used an old brass syringe to fill it, much easier.
p.s. Don't forget to make sure you can undo the filler before you try to drain off the old oil!
p.s. Don't forget to make sure you can undo the filler before you try to drain off the old oil!
I have been told by a TVR Specialist that this oil is good for the diff i will be ordering oil this weekend just to check before i go ahead. i know what you said above is the one to use so i am not sure what to do now, any advise please.
Cheers Scotty
http://www.opieoils.co.uk/p-736-castrol-saf-xj-75w...
Cheers Scotty
http://www.opieoils.co.uk/p-736-castrol-saf-xj-75w...
Edited by scotty_d on Wednesday 28th January 18:03
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


