Sump re-seal
Sump re-seal
Author
Discussion

sparkypete

Original Poster:

617 posts

234 months

Thursday 29th January 2009
quotequote all
I will need to remove and reseal my oil sump due to a leak, I intend to use a cork gasket and a smidging of sealant.
My question will the oil pump require priming because the sump has been removed.

Thanks

Pete

Del 203

12,728 posts

280 months

Thursday 29th January 2009
quotequote all
Pre serp possibly, serp shouldn't need priming smile


Loctite 598 & no gasket works wink

That Daddy

19,464 posts

252 months

Thursday 29th January 2009
quotequote all
Stock Rover gasket smeared with http://cgi.ebay.co.uk/wellseal-stag-jointing-compo... to hold it in position(read the instructions)oh you aint got to worry about excess falling in the sump either its not kind of jointing compound wink renew the lock washers while your at it,and dont forget to check the oil pick/up bolts are tight(most important) smile

Edited by That Daddy on Thursday 29th January 09:13

sparkypete

Original Poster:

617 posts

234 months

Thursday 29th January 2009
quotequote all
Its a pre serp, do you think the oil pump will need to be reprimed.

Pete

spend

12,581 posts

282 months

Thursday 29th January 2009
quotequote all
IF you have correct filter with anti-drainback it is very unlikely it will need priming. That should hold enough oil in the pump body & gears for a few weeks. I don't think there will be many filters that allow drainback around these days so I wouldn't worry about it.