Which one?
Which one?
Author
Discussion

MrPhotographer

Original Poster:

155 posts

214 months

Saturday 31st January 2009
quotequote all
Hello everyone

I've been reading the forums for a while and am finally about to take the plunge and buy my 1st TVR. I'm going for a Chimaera must be a 98R or later just because I prefer the later styling and ideally have the Estoril alloys.

There are two that I am planning to go and see and was wondering what your thoughts would be on them, I plan to have the chassis well looked at but my main concern is that Ive read that the cams can need changing around 60k, question is how will i know when this needs changing and what sort of thing does that involve work wise and cost?

Any help and advice would be great.

These are the two cars that I am thinking of.

http://pistonheads.com/sales/851396.htm

http://search.autotrader.co.uk/es-uk/www/cars/TVR+...

Not sure if Ive posted the links correctly, sorry.

Thanks.

funbobby

1,706 posts

289 months

Saturday 31st January 2009
quotequote all
ive had a car off phil decent guy to do business with, nice looking car to boot.

wheels1

209 posts

219 months

Saturday 31st January 2009
quotequote all
seem's a bit pricey to me for the mileage. I have seen 1999. 4L with under 20,000 miles go for under £9,000
How about this one? I know it's a little older, but half the mileage, 2/3 the price and the same owner for 8 years, usually a good sign.
http://pistonheads.com/sales/811714.htm

Edited by wheels1 on Saturday 31st January 19:24

MrPhotographer

Original Poster:

155 posts

214 months

Sunday 1st February 2009
quotequote all
wheels1 said:
seem's a bit pricey to me for the mileage. I have seen 1999. 4L with under 20,000 miles go for under £9,000
How about this one? I know it's a little older, but half the mileage, 2/3 the price and the same owner for 8 years, usually a good sign.
http://pistonheads.com/sales/811714.htm

Edited by wheels1 on Saturday 31st January 19:24
Thanks but its really a 98 facelift version I'm after. Anyone have any answers regarding the cam or other things I should look out for on a 50-60K miler?

Also is now a good time to buy or would I be better off waiting another month till the sun comes out, will I have more choice or do you think people will put their prices up?

confused

Chimjunkie

2,879 posts

242 months

Sunday 1st February 2009
quotequote all
MrPhotographer said:
Thanks but its really a 98 facelift version I'm after. Anyone have any answers regarding the cam or other things I should look out for on a 50-60K miler?

Also is now a good time to buy or would I be better off waiting another month till the sun comes out, will I have more choice or do you think people will put their prices up?

confused
The cam is only a problem if it is worn. If it is worn then the performance will be down. You need to have a feel of what performance to expect. This is best gained from arranging to test drive as many as you can over a weekend for example. The two you have listed both look great. But i would bet they feel different to drive. Go with the one that feels tight and responsive. Make sure the test drive route has something of everything. Especially somewhere to test the suspension out. Best time to buy is now IMO.

Good luck and enjoy!

TVR_nut_2008

22 posts

216 months

Sunday 1st February 2009
quotequote all
I think with the chassis if you have someone look at it, also have a proper look yourself from a pit or similar for piece of mind.

I paid a so called expert to inspect mine before I purchased it, who gave it a clean bill of health (in November, they also MOT'd it in August). Just had it back from a service at a place where people actually know what they're doing, where a severely corroded seat belt mount was noted (obvious to any idiot) and also a hole in the usual outrigger place (top of tube above flat plate). You'd never see the hole without getting underneath it, but once you're there you could get your finger around the tube and feel the hole. A mirror at the right angle also showed the rot. It’s about 60 – 70mm long and encompasses the whole top half of the tube. Either this was the fastest rot on record, or the place that looked at and MOT'd the car are pretty incompetent and frankly dangerous passing cars with such defects. If anyone wants any more info on this PM me so I don't break any rules by naming and shaming (I'm East Anglian based).

However, the car otherwise looks very good underneath and from the bottom all the tubes are solid and clean. My advice would be that if the outriggers haven’t been changed on any car you buy then budget for their replacement during your ownership, especially on a car of the sort of age you’re looking for. No surprises that way. The thought of chassis corrosion was always there in the back of my mind, but now I’m getting them sorted I can stop worrying and enjoy the car.

Good luck with your hunt anyway, they're cracking cars!

scotty_d

6,795 posts

225 months

Sunday 1st February 2009
quotequote all
yeah just what has been said on the outriggers mine is a 98 face lift and i have spent weeks striping off old powder coating and i am lucky i am doing it now it has some light surface rust under most of it around the wheel arch's horrible dirty job but worth doing if i left it my car will be a rot box in a year or two with out a doubt.

GAVC

163 posts

258 months

Sunday 1st February 2009
quotequote all
Sounds like you need a 98 450 facelift in Blue Pearl with new outriggers, new cam, new brakes, new pads, new tyres, new AFM, new lambda's, associated new sensors, rear drop links, new gaz gold coilovers..... in fact all the mechanicals sorted but may not be too fussed over the nose needing a paint job given the usual stone chips.

PM me if you are, good price (given all the above) as looking to trade up????

Chemlock

23 posts

215 months

Sunday 1st February 2009
quotequote all
Both seem very high priced. Still people seem very open to offers at the moment. Cars need to be shifted

MrPhotographer

Original Poster:

155 posts

214 months

Sunday 1st February 2009
quotequote all
TVR_nut_2008 said:
I think with the chassis if you have someone look at it, also have a proper look yourself from a pit or similar for piece of mind.

I paid a so called expert to inspect mine before I purchased it, who gave it a clean bill of health (in November, they also MOT'd it in August). Just had it back from a service at a place where people actually know what they're doing, where a severely corroded seat belt mount was noted (obvious to any idiot) and also a hole in the usual outrigger place (top of tube above flat plate). You'd never see the hole without getting underneath it, but once you're there you could get your finger around the tube and feel the hole. A mirror at the right angle also showed the rot. It’s about 60 – 70mm long and encompasses the whole top half of the tube. Either this was the fastest rot on record, or the place that looked at and MOT'd the car are pretty incompetent and frankly dangerous passing cars with such defects. If anyone wants any more info on this PM me so I don't break any rules by naming and shaming (I'm East Anglian based).

However, the car otherwise looks very good underneath and from the bottom all the tubes are solid and clean. My advice would be that if the outriggers haven’t been changed on any car you buy then budget for their replacement during your ownership, especially on a car of the sort of age you’re looking for. No surprises that way. The thought of chassis corrosion was always there in the back of my mind, but now I’m getting them sorted I can stop worrying and enjoy the car.

Good luck with your hunt anyway, they're cracking cars!
Thanks for the advice, what sort of costs were involved in replacing the outriggers?

MrPhotographer

Original Poster:

155 posts

214 months

Sunday 1st February 2009
quotequote all
GAVC - I have emailed you.

Chemlock - I realise they are a tad high and a few others have said that too, but what do you think would be a good price to negotiate at?

Thanks.