Replacing hand brake cable
Discussion
paulathome said:
IIRC you will need to take the zorst off to gain access to the bottom of the hand brake lever.
Quite straight forward once you can see, the cable is held to hand brake by a pin and clip.
Paul.
What he said. I also made the mistake of buying a new cable from a motor factors, not an OE one. The plastic end fittings which fit into the lugs on the calipers were too big and wouldn't fit, so I ended up buying the proper (and yes, more expensive) cable after all.Quite straight forward once you can see, the cable is held to hand brake by a pin and clip.
Paul.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



they have handbrakes?
Apparently