Chassis inspection
Discussion
Hi Guys,
If I was to view a Chim that was being sold by a private seller, what is the best way/place to view the chassis. I know people say take a trolley jack but this is not going to give a very clear or comfortable view.
The only other option is to spend ages sat at the local quickfit blagging my way onto their ramp instead of being out test driving the car.
Where did you view your chassis?
If I was to view a Chim that was being sold by a private seller, what is the best way/place to view the chassis. I know people say take a trolley jack but this is not going to give a very clear or comfortable view.
The only other option is to spend ages sat at the local quickfit blagging my way onto their ramp instead of being out test driving the car.
Where did you view your chassis?
Hi steve you need to get under the car. Im sure a garage local to where you are viewing/test driving the car would let you put it on there ramps for a bit of cash in hand. If the would be seller is against this idea he must be trying to hide something.Where in the northwest are you? Im in warrington cheshire and im in the middle of a full body off/chassis refurb on my chim. Any help or questions feel free to ask, Tom.
Steve,
I am under my Chim at the moment cleaning the outriggers, the car is at axle stand height and all the chassis is perfectly visible, see link,(well the underside anyhow!!) you will be fine with jack and one stand, get the wheel off though.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I am under my Chim at the moment cleaning the outriggers, the car is at axle stand height and all the chassis is perfectly visible, see link,(well the underside anyhow!!) you will be fine with jack and one stand, get the wheel off though.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




ed.