passenger door pops open
Discussion
Hi Guys having problem with passenger door coming open when driving, normaly only breaking the seal on door and lock still holding, but has even opend right up,(starting to run out of passengers on tight bends) have dissconected cable from center console, dissconected door button ,and unpluged solienoid, removed complete door lock and washed down with petrol and refitted, drive over any rough road and lock still pops open. Any ideas if not where can you buy new lock. Cheers Mateys C/P
Happened to my griff a couple of months ago. It was the catch not engaging properly. It was full of crud for one thing but the problem with it was the plastic coating on the bit of the catch that moves had split and and was stopping the catch clicking completely shut. Cutting the plastic away resolved my problem.
If you find a replacement lock will you post it up here. I'm in no rush but its going to get on my nerves that the lock isn't perfect.
If you find a replacement lock will you post it up here. I'm in no rush but its going to get on my nerves that the lock isn't perfect.
You first need to determine whether the latch is actually fully closing or not. It will move to a first safety position and then another 5mm or so to the full latched position. If this is the problem then a striker adjustment may fix it.
If not then for some reason the pawl and claw are not fully engaging inside the mechanism. - This will be because either the inside or outside release lever is jammed (but you've disconnected the cables right?) or because the profile on the pawl is worn away. Don't bother trying to fix it as automotive latches are designed as disposable items due to their safety critical nature. Look for a replacement - I *think* that it's a Vauxhall product?
dumbfunk
If not then for some reason the pawl and claw are not fully engaging inside the mechanism. - This will be because either the inside or outside release lever is jammed (but you've disconnected the cables right?) or because the profile on the pawl is worn away. Don't bother trying to fix it as automotive latches are designed as disposable items due to their safety critical nature. Look for a replacement - I *think* that it's a Vauxhall product?
dumbfunk
Barreti said:
... the plastic coating on the bit of the catch that moves had split and and was stopping the catch clicking completely shut. Cutting the plastic away resolved my problem.
The purpose of this part is to minimise metallic slam noise and so long as bits of it aren't still jammed somewhere it *should* be ok but you're wise to look for a replacement!Hi guys finaly fixed door lock thanks for the ideas, I had tried most of the.Te way I fixed it was to put a small tension spring from the door release catch,(the lever that the central control knob cable attaches to) there is already a hole in this lever just behind where the cable enters it, and is fixed with a screw and feral ( just like bike brake cable ) then I attached other end of spring to lock retaining plate,just above the lever is another little hole already there. the spring holds this lever in tension in the locked position. after months of fannying around with different things the lock now works fine. I cant help but think that when this lock was desined the two holes were ment to hold a spring to do just this, I hope this helps anyone with similar problem,if you cant understand from this I will take some pictures, Cheers Mateys C/P
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



