got my mark adams chip today
got my mark adams chip today
Author
Discussion

daz the plumber

Original Poster:

14,997 posts

262 months

Sunday 8th February 2009
quotequote all
just picked my mark adams chip today ,its for a standad 4.5. im wondering with the few mods ive done this chip will be close enough with out having it re programmed.ive heard the ecu can adjust its self 15%.

GreenV8S

31,027 posts

315 months

Sunday 8th February 2009
quotequote all
What's the difference between that and your original chip?

trackcar

6,453 posts

257 months

Sunday 8th February 2009
quotequote all
The only way youre going to know is to see how the car behaves with each chip fitted I guess! That means a measure of it's power with both chips and how the fuelling changes, and how smoothly it drives with each chip fitted. In the absence of the lucas remapping software to monitor what the ecu is actually doing a power test and a driveability test is about all youve got to go on.

As with all these things it's vitally important to make sure the base car is in tip-top condition though or you won't be making valid comparisons and one chip might be by chance masking an issue which at first appears to be solved but later gets worse and outside that which the chip can cover up ..


daz the plumber

Original Poster:

14,997 posts

262 months

Sunday 8th February 2009
quotequote all
well people shout about them ! if i have problems i can eather get mark adams to do me a best guess map or sell it !

GreenV8S

31,027 posts

315 months

Sunday 8th February 2009
quotequote all
daz the plumber said:
well people shout about them ! if i have problems i can eather get mark adams to do me a best guess map or sell it !
Is yours a 450? Is it a similar state of tune to the car that the chip was intended for?

spend

12,581 posts

282 months

Sunday 8th February 2009
quotequote all
It'll be faster than a 450 rofl

Chimjunkie

2,879 posts

242 months

Sunday 8th February 2009
quotequote all
spend said:
It'll be faster than a 450 rofl
hehe

daz the plumber

Original Poster:

14,997 posts

262 months

Sunday 8th February 2009
quotequote all
mine is a 400 .was removed from a standard 450,going to try it any way.taking the p..s again , thanks for the help . did not pay alot for it , just hoping mark adams may re map it .

Edited by daz the plumber on Sunday 8th February 22:14

V8 Animal

6,015 posts

241 months

Sunday 8th February 2009
quotequote all
You should be getting use to it nowlaugh

daz the plumber

Original Poster:

14,997 posts

262 months

Sunday 8th February 2009
quotequote all
did you try yours before you sent it to mark adams ?the guy who i purchased it off as a 450 and he fitted the act de cat y and a 500 chip and it works fine .i spoke to a guy yesterday who is very tech minded and he thinks the 450 chip will be ok

GreenV8S

31,027 posts

315 months

Sunday 8th February 2009
quotequote all
What are you hoping from it - more power, or solving a problem with the existing setup? I remember you had some threads a while ago about running problems but don't remember whether you ever got to the bottom of them.

slideways

4,101 posts

252 months

Monday 9th February 2009
quotequote all
rolleyes














Nuff said

Ribol

12,000 posts

289 months

Monday 9th February 2009
quotequote all
Penny to a pound it runs worse than with the original chip.

V8 GRF

7,299 posts

241 months

Monday 9th February 2009
quotequote all
I bought a square peg for a round hole today, can anyone suggest why it doesn't fit? wink

VerySideways

10,272 posts

303 months

Monday 9th February 2009
quotequote all
V8 GRF said:
I bought a square peg for a round hole today, can anyone suggest why it doesn't fit? wink
You're not using a big enough hammer? hehe

rigga

8,808 posts

232 months

Monday 9th February 2009
quotequote all
Ribol said:
Penny to a pound it runs worse than with the original chip.
+1

Daz..... did you ever manage to sort out the poor running of your car,or is this just another attempt at fixing it?

blitzracing

6,422 posts

251 months

Monday 9th February 2009
quotequote all
daz the plumber said:
mine is a 400 .was removed from a standard 450,going to try it any way.taking the p..s again , thanks for the help . did not pay alot for it , just hoping mark adams may re map it .

Edited by daz the plumber on Sunday 8th February 22:14
It will shunt at low speeds if the fueling is to far out as the ECU tries to compensate.

Mark

dingg

4,569 posts

250 months

Monday 9th February 2009
quotequote all
next post by Daz

me cars running like a bag of nails since I put in the Mark Adams chip
as anyone got any idea what might be wrongbangheadlaugh

Meatball

1,638 posts

241 months

Monday 9th February 2009
quotequote all
Didnt see that coming hehe

Daz why didnt you buy the right chip for YOUR car?

If you think a chip will solve your problems why dont you try Jamie @ CRE he also sells off the shelf chips.




daz the plumber

Original Poster:

14,997 posts

262 months

Monday 9th February 2009
quotequote all
nothing wrong with the running of my car, just the weird clatter noise on tick over and on load .i got it for the right price and hoping to send it to mark adams for a fee .what company is jamie@cre

Edited by daz the plumber on Monday 9th February 22:14