roof / window rubbers
roof / window rubbers
Author
Discussion

lewis_sharman

Original Poster:

5,958 posts

222 months

Sunday 8th February 2009
quotequote all
Does anybody know where i can get the roof rubbers that the windows close against? Mine are not looking too good and i get a very annoying wind whistle through them.

Thanks in advance

slideways

4,101 posts

252 months

Sunday 8th February 2009
quotequote all
i think clevor trevor does them i got some upgraded one last year

T_Pot

2,542 posts

228 months

Sunday 8th February 2009
quotequote all
is it possible to ever stop the wind noise then?
i thought it was a case of TADTS

would be happy to eliminate mine

spyschim

280 posts

253 months

Sunday 8th February 2009
quotequote all
yes clevor trevor does them or if you want to try something thicker or diff section do a search for woolies its where i get my trimming bits from they do all the rubbers and diff sections.

lewis_sharman

Original Poster:

5,958 posts

222 months

Sunday 8th February 2009
quotequote all
spyschim said:
yes clevor trevor does them or if you want to try something thicker or diff section do a search for woolies its where i get my trimming bits from they do all the rubbers and diff sections.
Ah i'm glad you came on! Is your internet working full time now then? I forget the name of the place you mentioned before but i will give it a look up.

And hows the new grill coming along?

lewis_sharman

Original Poster:

5,958 posts

222 months

Sunday 8th February 2009
quotequote all
T_Pot said:
is it possible to ever stop the wind noise then?
I sure hope so biggrin
Edited by lewis_sharman on Sunday 8th February 22:06


Edited by lewis_sharman on Sunday 8th February 22:07

Chimjunkie

2,879 posts

242 months

Sunday 8th February 2009
quotequote all
spyschim said in this thread said:
its where i get my rubbers
and in a previous thread long long ago...

spyschim said in another thread said:
Leather and stuff....sewing machines...


hehe

spyschim

280 posts

253 months

Sunday 8th February 2009
quotequote all
Chimjunkie said:
spyschim said in this thread said:
its where i get my rubbers
and in a previous thread long long ago...

spyschim said in another thread said:
Leather and stuff....sewing machines...


hehe
does it fit chimspliff i thought you were going to keep your fetishes quiet ! and yes grills done looks good i will post photos soon

TimmyArt

1,425 posts

249 months

Monday 9th February 2009
quotequote all
Get some new rubbers from www.tvrcarparts.com
Give them a call I would as there is a Mk1 and Mk2.
Then adjust the window height so it touches the rubbers when they wind up. There is a thread on that somewhere here - it involves adjusting a scew down the side of the glass - very simple to do.
I still get wind noise where the top of the pilar/triangle meets the roof though, not sure what to do about that! Any ideas?

rigga

8,808 posts

232 months

Monday 9th February 2009
quotequote all
Had a slight gap on one edge of my drivers window,did as advised in the bible and inserted some washer pipe tube into the hollow of the seal,hey presto no more gap......

ph1l5

5,027 posts

233 months

Monday 9th February 2009
quotequote all
Racetech do rubber seals, I think it £5.00 a meter

spyschim

280 posts

253 months

Monday 9th February 2009
quotequote all
TimmyArt said:
Get some new rubbers from www.tvrcarparts.com
Give them a call I would as there is a Mk1 and Mk2.
Then adjust the window height so it touches the rubbers when they wind up. There is a thread on that somewhere here - it involves adjusting a scew down the side of the glass - very simple to do.
I still get wind noise where the top of the pilar/triangle meets the roof though, not sure what to do about that! Any ideas?
take the roof off !!!!

Hoover.

5,993 posts

273 months

Tuesday 10th February 2009
quotequote all
you can always adjust the window fit as well to get it to fit....

or as said above..... take the roof off cloud9